Voyage Trekkers Prop Montage

With season 2 of Voyage Trekkers starting this week I thought I would share a video of some of the props I made for this seasons episodes. Check it out!

Laser Swords

A few months ago I posted a teaser picture of a project I had been working on for Voyage Trekkers season 2. Well now that we are days from Phoenix Comicon I'm gonna show you what was it that box. I present to you... Laser Swords! A must have for your dueling needs.

Ray Gun Redesign

From the beginning, the makers of Voyage Trekkers wanted to have a unique ray gun for their series. Unfortunately do to time constraints when filming season 1 there was not a lot of time to spend on making custom weapons. Now that season 2 is in production the creator/director and the head of the art department came to me to redesign the ray gun from season 1. The ray gun from season 1 was basically a nerf gun repainted. My job was to improve upon the current ray gun, making it more unique to the series. This is the build up to that gun.


Original unmodified Nerf gun. Same model used in season 1.

These are all the parts I will use from the original gun.

With a Dremel tool I cut off parts of the handle and pieces of the main body.

Then I cut a strip of 1/16 ABS plastic and super glued it in place of where the handle was cut.

Next step is to fill all the gaps and unwanted areas with epoxy putty.

Once the epoxy putty was completely dry I added a thin layer of filler over all those areas to smooth everything out.

Once the filler is sanded smooth, the body of the gun is sprayed with a coat of primer.

Next step was to mark the cut in the trigger and drill it out.

Certain found objects used in this build had to be molded because of only have one available (3 guns were to be made) or because I needed them cast in a different material than what the found part came in.

Inner part of the body was cast in clear so it could be lit with LEDs.

PVC tubes were cut and mounted under the barrel of the gun.

Automotive wiped blades were cut up and used as fins and other details on the ray run.

3 coats of automotive grade white paint applied.

Black parts hand painted in and entire body clear coated.

Once the paint was fully cured the entire gun was assembled and the custom LED wiring placed inside. Here is a look at the season 1 ray gun compared to the season 2 ray gun.

 

Voyage Trekkers: A Qwest for Sight

One of the Voyage Trekker props I was asked to improve upon was the Lt. Jayda mask. The original mask that was sculpted by Brian Blackwell for season 1 was cast with the eyes solid, therefor the actor could not see anything. This is where I come in... but I think before I get into the modifying of the mask we should all watch the first episode that featured Lt. Jayda.

Now on to the new eye constructing. This is how the mask looked when it arrived at my shop, 0% visibility. A second mask that was a bad pull out of the mold was also dropped off as well for testing purposes.

 

First thing I did was purchase a set of acrylic ornament balls at a craft store that were the correct size to Jayda's eyes. Then I cut out the eye from the second mask that was the bad cast and used it to trace an outline on the acrylic ball so I knew where to cut. Making sure to label the top of the eye and which eye it was so there wouldn't be any confusion later on.

Once the acrylic ball was all cut and the edges smoothed out I test fitted it over top of the eye on the screen used mask.

The next step would be making the eye black, but still allowing the actor to see through it. I tried several different methods, but this way seemed to be the best fit overall.

I first cut out a piece of 4 way stretch black cloth that was slightly bigger than the acrylic eye piece.

I stretched it around gluing it every 1/4 of an inch with gel super glue making sure to keep the fabric tight.

This is how the final result came out. Completely black with about 90% visibility.

The next step would be attaching the new eyes to the existing mask. So what I ended up doing was drawing a line about 1/2 of an inch in on the original eyes that would act as a cut line.

Then I used a sharp hobby knife and cut on the line drawn.

Once the middle piece was removed I applied more super glue gel to the remaining section of eye and glued the new eye in place.The same steps were repeated for the other eye.

I didnt do a whole lot with this project, but what I did do will hopefully make a world of difference for the actor playing Lt. Jayda. Here is the final product with his new peepers.

Voyage Trekkers

So back in January I went to a web series screening of Voyage Trekkers at the Film Bar in Phoenix. I sat down with the director after the screening and discussed building a few props for their season 2. I am very excited to say that the first set of props are completed and are already in his hands for shooting at the beginning of this month. I will be helping build more props for the rest of the season so look for future updates on those.

Here is a teaser of what you might see:

 

What does this case contain? Could it be the answer to world peace? You will have to check out Voyage Trekkers Season 2 to find out!